Mine Shaft Wash

Total Miles 2.1
Technical Rating
4 Moderate
Best Time Spring, Fall, Winter
Trail Type Full-Width Road
Accessible By
Open Trail Map

Trail Overview

This trail starts off as an easy-going trail with a few small ruts. There will be a gate you must open and close behind you as you travel the first section of the trail. The trail will continue on a laid-back path until you pass a few juniper trees as the trail starts to traverse downhill. You will get a great view while descending towards an old mining operation that is marked by a blue tailings pile. The trail will pass right by an abandoned mine shaft that is fenced off. From there, the trail gets faint, narrow, and extremely steep. Use caution if you are in a full-sized 4x4; some areas are extremely narrow. This downhill descent is steep, rutted, and loose rocks are all around. After you climb down this section, the trail follows a dry wash and ends at a dried-up cattle tank.

Photos of Mine Shaft Wash

Difficulty

Expect an uneven, rutted dirt trail with loose rocks, sand, erosion, and washes. Expect obstacles up to 18 inches and short, narrow, and steep grades.

History

There is an old mine located on the side of this trail. It is a great place to explore with a filled-in shaft present and old foundations still intact.

Technical Rating

4

Mine Shaft Wash Trail can be accessed by the following ride types:

  • Single Track
  • 50 Inch
  • 60 Inch
  • High Clearance
  • Full Width

Mine Shaft Wash Map

The onX Offroad Difference

onX Offroad combines trail photos, descriptions, difficulty ratings, width restrictions, seasonality, and more in a user-friendly interface. Available on all devices, with offline access and full compatibility with CarPlay and Android Auto. Discover what you're missing today!

Open Trail Map